Method for rapid fabrication of template silica gel:
Silica gel mold rapid production: is one of the ways of the template processing, silicone mold production can be divided into direct and two 

mold manufacturing method, direct method is through a silicone rubber mold cavity structure of the preparation, curing, manual cutting, 

so that the upper and lower mold respectively. In the practical application, the direct method is adopted, and the process flow is as follows:

Factors affecting palm silicone mold characteristics: molding property of silica gel, mold the nozzle and mold structure and mold core and

 the preset use, mold size and cavity volume, these factors will affect the mold injection accuracy and service life. Silicone mold characteristics 

are the main factors: molding property of silica gel, mold the nozzle and mold structure and mold core and the preset use, mold size and cavity 

volume, these factors will affect the mold injection accuracy and service life.

Hand silicone mold has the following characteristics:
(1) good operating performance. The soft mold is transparent or semi transparent, and has good tensile strength, easy to cut type.
(2) good repeatability. The silicone rubber used in the mold has good fluidity, and can be used in the vacuum degassing, and can accurately 

maintain the detailed structure and decoration of the model.
(3) good off mode. For the model in the direction of the model in the reverse slope structure, can rely on the elastic deformation of the material directly out of the model.
(4) a good model of dimensional stability.
SHEN ZHEN GREEN PROTOTYPES TECHOLOGY CO., LTD is a professional silicone molding, vacuum casting, small batch sample production. Welcome to visit us.